CreteFlooring EPC 140 | Yapı Kimyasalları

CreteFlooring EPC 140 is a two component epoxy based thin layer primer and penetration material for cementitious surfaces.

PRIMARY APPLICATIONS

Under epoxy/polyurethane floor coverings,
Under polyurethane insulation systems,
In the production of filling and repair mortar by mixing with appropriate amounts of silica sand,
As a surface smoothing mortar on the surfaces where bituminous membrane will be applied.

FEATURES / BENEFITS

Easy to apply and clean.
Does not contain solvent.
It has high chemical resistance. It is resistant to dilute acids, soda solution, salt solutions, mineral oils and many chemicals.
It penetrates the capillary spaces in the concrete structure and blocks the spaces.
It is resistant to moisture rising from the ground.
It has low viscosity.
It does not lose its properties in sudden temperature changes between (-20^oC) – (+50^oC).

TECHNICAL INFORMATION

The following information has been determined under laboratory conditions of 23°C and 50% relative humidity.

Features	CreteFlooring EPC 140
Component A	Epoxy resin
Component B	Epoxy hardener
Colour	Transparent
Density of Mixture	1.089 kg/L
Shore D hardness	≤ % 0,05
Compressive Strength (7 days)	50 N/mm²
Flexural Strength (7 days)	20 N/mm²
Adhesion to Concrete (7 days)	>2 N/mm²
Application Floor Temperature	(+8°C) – (+30°C)
Usage Period	20 min
Walkable Time	8 hours
Full Cure Time	7 days

PACKAGING

Component A - Epoxy resin; 10.2kg
Component B - Epoxy hardener; 4.8kg

TDS