CreteFix V 945C | Yapı Kimyasalları

CreteFix V 945C is a resin-based, two-component, high-performance, paste-like anchoring and assembly mortar that can be easily applied with a special gun.

PRIMARY APPLICATIONS

It is used as a fast curing anchor material in all classes below;

In construction iron, sprout planting processes,
Bolts and special fixing systems,
Metric rods,
Concrete (in cracked and non-cracked concrete),
Hollow or solid brick,
Hard natural stone, hard rock,

FEATURES

It cures fast.
It has a high load carrying capacity.
It is suitable for use in cracked concrete.
It is applied with standard guns.
It does not sag even in overhead applications.
It does not contain styrene, has low odor and is less wasteful.
Drinking water is certified.
LEED compliance available.
Product performance is guaranteed by ETA.

TECHNICAL INFORMATION

The following information has been determined under laboratory conditions of 23°C and 50% relative humidity.

Features	Results	Test Standard
Density	~1.7 kg/cm³ (A+B Mix)	ASTM D 1875@+20⁰C
Compressive Strength	~60 N/mm²(4 hour) ~70 N/mm²(24 hour) ~ 75 N/mm²(7 day)	(BS6319)
Modulus of Elasticity at Compressive	~3.13 GN/m²(7 day)	ASTM D 695@+20⁰C
Tensile Strength in Bending	~24 N/mm²(7 day)	ASTM D 695@+20⁰C
Tensile Strength	~11 N/mm²(24 hour) ~13 N/mm²(7 day)	ASTM D 638@+20⁰C
Service Temperature	Long-term -40°C min. / +50°C max Short-term (1-2 hour) +80°C	(ETAG 001, part 5)

PACKAGING

CreteFix V 945C is available as a 410 ml cartridge (12 cartridges/case).

TDS